Comments on: How To Get Atheros AR242x To Work on 8.10 Intrepid Ibex http://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/ Kubuntu, Linux, Hardware. Sat, 20 Feb 2010 21:51:55 +0000 http://wordpress.org/?v=2.9.2 hourly 1 By: Pengiohttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1448 Pengio Tue, 09 Feb 2010 12:53:41 +0000 http://madberry.org/?p=644#comment-1448 Words cannot express my gratitude... This worked beautifully the first time through. Thank you very much! Words cannot express my gratitude… This worked beautifully the first time through. Thank you very much!

]]> By: Likunhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1398 Likun Mon, 30 Nov 2009 01:01:23 +0000 http://madberry.org/?p=644#comment-1398 The method is not totally work for compat-wireless-2.6.32-rc7.tar.bz2 and kernel 2.6.27-11-generic. It seem this is there are some misconfig in compat-wireless-2.6.32-rc7.tar.bz2.You can get though by this way (at least this works for my ThinkPad T400 with ubuntu 8.10). After make install and make unload, before make load, here is what you have to do:cd /lib/modules/2.6.27-11-generic/updates sudo mv net/mac80211/mac80211.ko net/mac80211/mac80211-bak.ko sudo cp lbm_cw-cfg80211.ko net/mac80211/mac80211.ko sudo mv net/wireless/cfg80211.ko net/wireless/cfg80211-bak.ko sudo cp lbm_cw-mac80211.ko net/wireless/cfg80211.koFor those cases that not works, Hope this will help. The method is not totally work for compat-wireless-2.6.32-rc7.tar.bz2 and kernel 2.6.27-11-generic. It seem this is there are some misconfig in compat-wireless-2.6.32-rc7.tar.bz2.

You can get though by this way (at least this works for my ThinkPad T400 with ubuntu 8.10). After make install and make unload, before make load, here is what you have to do:

cd /lib/modules/2.6.27-11-generic/updates
sudo mv net/mac80211/mac80211.ko net/mac80211/mac80211-bak.ko
sudo cp lbm_cw-cfg80211.ko net/mac80211/mac80211.ko
sudo mv net/wireless/cfg80211.ko net/wireless/cfg80211-bak.ko
sudo cp lbm_cw-mac80211.ko net/wireless/cfg80211.ko

For those cases that not works, Hope this will help.

]]> By: NeptuneUKhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1266 NeptuneUK Mon, 02 Nov 2009 18:00:43 +0000 http://madberry.org/?p=644#comment-1266 [mad]Berry you are the man!!!!!Had tried everything else without luch, was about to give up and then found your info.Followed the tutorial and hey presto! working wireless........Thanks very much. [mad]Berry you are the man!!!!!

Had tried everything else without luch, was about to give up and then found your info.

Followed the tutorial and hey presto! working wireless……..

Thanks very much.

]]> By: Rebroadhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1259 Rebroad Mon, 26 Oct 2009 16:23:03 +0000 http://madberry.org/?p=644#comment-1259 Thanks! This worked!Well, I had to deviate slightly. For example, I had two tar files, and when untarred they gave two different directories. As the cd command can take only one argument, your cd compat-wireless-* command fails. I ended up deleting the older version, and just using the newer one, and it seemed to work.ath5k needs adding to /etc/modules BEFORE the reboot you mention, also. Thanks! This worked!

Well, I had to deviate slightly. For example, I had two tar files, and when untarred they gave two different directories. As the cd command can take only one argument, your cd compat-wireless-* command fails. I ended up deleting the older version, and just using the newer one, and it seemed to work.

ath5k needs adding to /etc/modules BEFORE the reboot you mention, also.

]]> By: victorhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1257 victor Thu, 22 Oct 2009 12:37:52 +0000 http://madberry.org/?p=644#comment-1257 Thank you soooo much!It was easy to follow and efficient. It worked fine on my FS V6505 with Ubuntu 9.04.God bless you! Thank you soooo much!

It was easy to follow and efficient.
It worked fine on my FS V6505 with Ubuntu 9.04.

God bless you!

]]> By: Ivicahttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1236 Ivica Mon, 28 Sep 2009 18:38:29 +0000 http://madberry.org/?p=644#comment-1236 uname -a: Linux ivica-laptop 2.6.27-14-generic #1 SMP Mon Aug 31 13:01:41 UTC 2009 i686 GNU/Linuxcat /etc/issue: Ubuntu 8.10 \n \liwconfig: lo no wireless extensions.eth0 no wireless extensions.pan0 no wireless extensions.iwlist wlan0 scanning: wlan0 Interface doesn't support scanning. uname -a:
Linux ivica-laptop 2.6.27-14-generic #1 SMP Mon Aug 31 13:01:41 UTC 2009 i686 GNU/Linux

cat /etc/issue:
Ubuntu 8.10 \n \l

iwconfig:
lo no wireless extensions.

eth0 no wireless extensions.

pan0 no wireless extensions.

iwlist wlan0 scanning:
wlan0 Interface doesn’t support scanning.

]]> By: Alivallohttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1223 Alivallo Thu, 10 Sep 2009 19:46:52 +0000 http://madberry.org/?p=644#comment-1223 http://wireless.kernel.org/download/compat-wireless-2.6this method worked for me.....I tried all the above methods also without luck.short story: my ATI radeon Xpress will not use openGL in ubuntu 9.04 solution: went back to 8.10...and used the 'unsupported' proprietary FGLRX driverNEW Problem!!: 8.10 will not work with my atheros wireless card. solution: tried everything from. NDIS wrapper, MadWifi, proprietary drivers. arrrrhhhhhhggghhh. short of getting a USB wireless card and using that instead of by built-in card.Real Solution: follow the steps above in this article!Thank you SOOOOOO much MadBerry!!!!! Been learning with many different linux distros since ubuntu 7.10 caught my with Beryl, emerald and compiz. and due to the frustration and many lonely weekends wasted of so many incompatibilities over the years I was ready to give it up and stay with XPsp3 or Windows 7. But you save the day. http://wireless.kernel.org/download/compat-wireless-2.6

this method worked for me…..I tried all the above methods also without luck.

short story: my ATI radeon Xpress will not use openGL in ubuntu 9.04
solution: went back to 8.10…and used the ‘unsupported’ proprietary FGLRX driver

NEW Problem!!:
8.10 will not work with my atheros wireless card.
solution:
tried everything from. NDIS wrapper, MadWifi, proprietary drivers. arrrrhhhhhhggghhh.
short of getting a USB wireless card and using that instead of by built-in card.

Real Solution:
follow the steps above in this article!

Thank you SOOOOOO much MadBerry!!!!!
Been learning with many different linux distros since ubuntu 7.10 caught my with Beryl, emerald and compiz. and due to the frustration and many lonely weekends wasted of so many incompatibilities over the years I was ready to give it up and stay with XPsp3 or Windows 7. But you save the day.

]]> By: joemarhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1222 joemar Wed, 09 Sep 2009 10:06:44 +0000 http://madberry.org/?p=644#comment-1222 Hello good day. Is there any possible solution that you can tell me to work with ubuntu jaunty im able to get it work but when my computer shutsdown it return to the same problem ang i have to follow the same command above. Thanks in advance Hello good day. Is there any possible solution that you can tell me to work with ubuntu jaunty im able to get it work but when my computer shutsdown it return to the same problem ang i have to follow the same command above. Thanks in advance

]]> By: Aaron Moorehttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1219 Aaron Moore Mon, 24 Aug 2009 14:59:45 +0000 http://madberry.org/?p=644#comment-1219 Hello madberry,I get the same as this iwlist scanning below (pasted from above)...What's going on with the IE: Unknown? If I turn on encryption I get 1 line in the middle of the IEs unknown, showing my encryption, but still no association with the API suspect wireless N compatibity with the Ath5k.. Do we know if the ath5k works with wireless N routers??? Wireless N is supposed to be backwards compatible....How many people on these forums have wireless N routers???Any advice welcomedmany thanksAaronhttp://paste.ubuntu.com/283418/ Hello madberry,

I get the same as this iwlist scanning below (pasted from above)…

What’s going on with the IE: Unknown? If I turn on encryption I get 1 line in the middle of the IEs unknown, showing my encryption, but still no association with the AP

I suspect wireless N compatibity with the Ath5k.. Do we know if the ath5k works with wireless N routers??? Wireless N is supposed to be backwards compatible….

How many people on these forums have wireless N routers???

Any advice welcomed

many thanks

Aaron

http://paste.ubuntu.com/283418/

]]> By: Flaviohttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1218 Flavio Mon, 24 Aug 2009 14:27:10 +0000 http://madberry.org/?p=644#comment-1218 Thanks, It worked just fine for me. My Atheros card , kernel version and distro are the following: 01:07.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01) Linux MSI-preview 2.6.27-14-generic #1 SMP Tue Aug 18 17:21:41 UTC 2009 x86_64 GNU/Linux Ubuntu 8.10 Intrepid Thanks, It worked just fine for me.
My Atheros card , kernel version and distro are the following:
01:07.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01)
Linux MSI-preview 2.6.27-14-generic #1 SMP Tue Aug 18 17:21:41 UTC 2009 x86_64 GNU/Linux
Ubuntu 8.10 Intrepid

]]> By: Michael Carpenterhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1215 Michael Carpenter Mon, 17 Aug 2009 14:50:21 +0000 http://madberry.org/?p=644#comment-1215 I couldn't get this working. http://pastebin.ubuntu.com/254554/I'll admit that I haven't read through all the comments and I'll try doing that next, but if you have any suggestions, I would appreciate it.Thanks. I couldn’t get this working.
http://pastebin.ubuntu.com/254554/

I’ll admit that I haven’t read through all the comments and I’ll try doing that next, but if you have any suggestions, I would appreciate it.

Thanks.

]]> By: first keeperhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1206 first keeper Fri, 31 Jul 2009 16:39:22 +0000 http://madberry.org/?p=644#comment-1206 <a href="#comment-814" rel="nofollow">@[mad]Berry</a>, i ran this and got " interface doesn't support scanning." @[mad]Berry, i ran this and got ” interface doesn’t support scanning.”

]]> By: tatersalidhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1203 tatersalid Fri, 17 Jul 2009 06:00:01 +0000 http://madberry.org/?p=644#comment-1203 Hey... sorry i cant tell you exactly wqhats going on... but i did everything as instructed... and according to waht you said was working mine is... however, i cant yet seem to get it to properly function... if you can let me know... about any way to get it going... id be more than appreciative Hey… sorry i cant tell you exactly wqhats going on… but i did everything as instructed… and according to waht you said was working mine is… however, i cant yet seem to get it to properly function… if you can let me know… about any way to get it going… id be more than appreciative

]]> By: tmhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1201 tm Sat, 11 Jul 2009 15:37:05 +0000 http://madberry.org/?p=644#comment-1201 HI great tutorial i am stuck @iwconfig:lo no wireless extensions.eth0 no wireless extensions.wmaster0 no wireless extensions.wlan0 IEEE 802.11bg ESSID:"" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0vboxnet0 no wireless extensions....My mobile device won't recognize wifi.m using jaunty 64bit btw thanks in advance HI great tutorial i am stuck @

iwconfig:

lo no wireless extensions.

eth0 no wireless extensions.

wmaster0 no wireless extensions.

wlan0 IEEE 802.11bg ESSID:”"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

vboxnet0 no wireless extensions.

…

My mobile device won’t recognize wifi.

m using jaunty 64bit btw thanks in advance

]]> By: Cinabrohttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1200 Cinabro Mon, 06 Jul 2009 09:39:04 +0000 http://madberry.org/?p=644#comment-1200 Hello. Sorry but i've tried everything and i think at the moment i mess everything... try your instruction but no way... here the oputput:uname -a Linux dalek 2.6.28-13-generic #45-Ubuntu SMP Tue Jun 30 19:49:51 UTC 2009 i686 GNU/Linuxiwconfig lo no wireless extensions.eth0 no wireless extensions.wlan0 IEEE 802.11g ESSID:off/any Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0pan0 no wireless extensions.iwlist wlan0 scanning wlan0 no scan resultlspci 08:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 04)dmesg | grep wlan0 [ 12.937699] wlan0: ethernet device 00:22:5f:41:8b:e7 using serialized NDIS driver: net5211, version: 0x50003, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:001C.5.conf [ 12.943177] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 90.253453] ADDRCONF(NETDEV_UP): wlan0: link is not readyUbuntu Jackalope 9 on Amilo Pa 3515thank in advance.... Hello.
Sorry but i’ve tried everything and i think at the moment i mess everything… try your instruction but no way…
here the oputput:

uname -a
Linux dalek 2.6.28-13-generic #45-Ubuntu SMP Tue Jun 30 19:49:51 UTC 2009 i686 GNU/Linux

iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11g ESSID:off/any
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Bit Rate:54 Mb/s
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

pan0 no wireless extensions.

iwlist wlan0 scanning
wlan0 no scan result

lspci
08:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 04)

dmesg | grep wlan0
[ 12.937699] wlan0: ethernet device 00:22:5f:41:8b:e7 using serialized NDIS driver: net5211, version: 0×50003, NDIS version: 0×501, vendor: ‘NDIS Network Adapter’, 168C:001C.5.conf
[ 12.943177] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 90.253453] ADDRCONF(NETDEV_UP): wlan0: link is not ready

Ubuntu Jackalope 9 on Amilo Pa 3515

thank in advance….

]]> By: Alexeyhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1194 Alexey Wed, 24 Jun 2009 09:39:47 +0000 http://madberry.org/?p=644#comment-1194 <a href="#comment-1147" rel="nofollow">dBuster</a>, you need to patch madwifi. More details here http://madwifi-project.org/ticket/1018. I belive that in future this patch will be added in trunk. dBuster, you need to patch madwifi. More details here http://madwifi-project.org/ticket/1018. I belive that in future this patch will be added in trunk.

]]> By: anafhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1191 anaf Mon, 22 Jun 2009 22:59:02 +0000 http://madberry.org/?p=644#comment-1191 hello, I'm french and I tried your solution decribe upper. iwconfig says : eth0 no wireless extensions.wmaster0 no wireless extensions.wlan0 IEEE 802.11bg ESSID:"" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0pan0 no wireless extensions.wicd tells me there is no wireless available. I don't understand what's wrong with it ? Could you please give me some advice. Moreover there were no pb during the install of your procedure. Thx for your answer, Anaf hello, I’m french and I tried your solution decribe upper.
iwconfig says : eth0 no wireless extensions.

wmaster0 no wireless extensions.

wlan0 IEEE 802.11bg ESSID:”"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

pan0 no wireless extensions.

wicd tells me there is no wireless available. I don’t understand what’s wrong with it ? Could you please give me some advice. Moreover there were no pb during the install of your procedure.
Thx for your answer,
Anaf

]]> By: Grant Hookhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1189 Grant Hook Fri, 12 Jun 2009 23:02:58 +0000 http://madberry.org/?p=644#comment-1189 I'm getting very frustrated with this! Thought transition to Linux would be easy, but what do I know? :S Anyway, got a Compal JHL90 with Atheros AR242x. The wireless card appears to work in that Ubuntu recognises it, I have a wlan0 device listed, network manager shows all the wireless networks I can connect to, but when I select my home network, it spends a while attempting to connect and then stops, and says 'Disconnected' in the top right. Any help would be much appreciated I’m getting very frustrated with this! Thought transition to Linux would be easy, but what do I know? :S
Anyway, got a Compal JHL90 with Atheros AR242x. The wireless card appears to work in that Ubuntu recognises it, I have a wlan0 device listed, network manager shows all the wireless networks I can connect to, but when I select my home network, it spends a while attempting to connect and then stops, and says ‘Disconnected’ in the top right.
Any help would be much appreciated

]]> By: joe kohlerhttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1187 joe kohler Mon, 08 Jun 2009 14:25:07 +0000 http://madberry.org/?p=644#comment-1187 Linux ubuntu 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686 GNU/Linux Ubuntu 9.04 \n \lwlan0 IEEE 802.11bg ESSID:"USR8054" Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0wlan0 Scan completed : Cell 01 - Address: 00:14:6C:1F:86:52 ESSID:"NETGEAR" Mode:Master Channel:11 Frequency:2.462 GHz (Channel 11) Quality=93/100 Signal level:-43 dBm Noise level=-103 dBm Encryption key:on IE: Unknown: 00074E455447454152 IE: Unknown: 010882848B962430486C IE: Unknown: 03010B IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: DD06001018020000 Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Extra:tsf=00000028ff4b5188 Extra: Last beacon: 5512ms ago Cell 02 - Address: 00:C0:49:E3:62:94 ESSID:"USR8054" Mode:Master Channel:11 Frequency:2.462 GHz (Channel 11) Quality=10/100 Signal level:-96 dBm Noise level=-103 dBm Encryption key:off IE: Unknown: 000755535238303534 IE: Unknown: 010582848B962C IE: Unknown: 03010B IE: Unknown: 2A0100 IE: Unknown: 32080C1218243048606C IE: Unknown: DD0A0800280101000200FF0F Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Extra:tsf=0000005ffdf34121 Extra: Last beacon: 32ms ago Linux ubuntu 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686 GNU/Linux
Ubuntu 9.04 \n \l

wlan0 IEEE 802.11bg ESSID:”USR8054″
Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

wlan0 Scan completed :
Cell 01 – Address: 00:14:6C:1F:86:52
ESSID:”NETGEAR”
Mode:Master
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=93/100 Signal level:-43 dBm Noise level=-103 dBm
Encryption key:on
IE: Unknown: 00074E455447454152
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 2F0100
IE: Unknown: 32040C121860
IE: Unknown: DD06001018020000
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
12 Mb/s; 48 Mb/s
Extra:tsf=00000028ff4b5188
Extra: Last beacon: 5512ms ago
Cell 02 – Address: 00:C0:49:E3:62:94
ESSID:”USR8054″
Mode:Master
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=10/100 Signal level:-96 dBm Noise level=-103 dBm
Encryption key:off
IE: Unknown: 000755535238303534
IE: Unknown: 010582848B962C
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 32080C1218243048606C
IE: Unknown: DD0A0800280101000200FF0F
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Extra:tsf=0000005ffdf34121
Extra: Last beacon: 32ms ago

]]> By: pelenghttp://madberry.org/2008/11/how-to-get-atheros-ar242x-to-work-on-810-intrepid-ibex/comment-page-9/#comment-1185 peleng Wed, 03 Jun 2009 16:01:43 +0000 http://madberry.org/?p=644#comment-1185 Have never had WiFi problem until this very morning. After waking up from suspend wireless failed to catch the network while the Atheros was up and running. To solve the problem I've tried nothing but cutting off power completely for a couple of hours and booting machine up then. Run U904 on Fujitsu Siemens Esprimo V6535 with all default settings as single boot OS via D-Link DSL 2640. Very strange. Have never had WiFi problem until this very morning. After waking up from suspend wireless failed to catch the network while the Atheros was up and running. To solve the problem I’ve tried nothing but cutting off power completely for a couple of hours and booting machine up then. Run U904 on Fujitsu Siemens Esprimo V6535 with all default settings as single boot OS via D-Link DSL 2640. Very strange.

]]>